How to use the Blaupunkt Bluebot C1?

Find out all about the Blaupunkt Bluebot C1 robotic vacuum cleaner. Here you’ll find product details, manuals and instructional videos so you can get the most out of your Blaupunkt Bluebot robot. The videos are divided into general installation and maintenance and videos specific to the Bluebot app settings.

Download the Blaupunkt Bluebot C1 manual and instructions on how to connect to the Bluebot app below.

Installation & maintenance

If you take good care of your Blaupunkt robot, you will enjoy it longer. Note that the robot needs weekly cleaning for optimal use. To clean the Blaupunkt Bluebot C1, we explain to you how to do so in several videos.

Installation

See here how to install the Blaupunkt Bluebot C1 and how to connect to the Blaupunkt Bluebot app. Details in app can be found below at Bluebot app instructions.

Filters maintenance

This video shows how to maintain the Blaupunkt filter C1. This covers both the HEPA filter and the primary filter in the dust bin.

Brushes

Watch this video to see how to maintain the Blaupunkt Bluebot C1 brushes. Proper maintenance of your robot will ensure that the brushes continue to rotate and sweep your floors.

Mop/watertank

Want to use the Blaupunkt Bluebot C1 mop and know where to refill the water? Check out how to let the robot mop your floors too.

Sensors

Watch this video for an explanation of how to maintain the Blaupunkt Bluebot C1 sensors. Regularly cleaning the sensors will keep the robot cleaning your floors efficiently.

Reset

Resetting the Blaupunkt Bluebot C1? Watch this video to find out how to do this and to see where the Blaupunkt Bluebot C1 reset button is located.

Accessories

Optimal results and life of your robot? You do that by replacing parts such as the HEPA filter or the side brushes on time. In our webshop you will find the available accessory sets for your robot vacuum cleaner.

The Bluebot App

Bluebot app connection

Here are the steps to take in the Bluebot app to connect the robot to the app. Make sure your Wi-Fi is on only 2.4 Ghz.

Cleaning programms

The Blaupunkt Bluebot C1 has different cleaning programs. You can easily choose these in the Bluebot app, watch the capabilities of the C1 robot in the video.

Set-up cleaning routines

How can you easily set up cleaning routines in the Blaupunkt Bluebot app? This video shows you where to find this.

Configuration reset

The Blaupunkt Bluebot C1 you can also reset the configuration via the Bluebot app. See here easily how to do this.

Find the robot

Have you lost the robot and really can’t see it? Then go to the ‘Find the robot’ setting in the Blaupunkt Bluebot app and the robot will call you. Because who knows, maybe he’s just hiding under the couch.

Do not disturb

If you don’t want the robot to disturb you, set the ‘Do not disturb’ mode. See where this setting is located in the Bluebot app here.

Consumables

The robot has some consumables that need to be replaced in a timely manner, such as the side brushes and HEPA filter. Through this setting in the Bluebot app, you can see when it is needed and reset it after replacing the part.

Real time map

For the C1 robot vacuum cleaner, the Blaupunkt Bluebot app can only show a map in real time during cleaning. See an example here.

Frequently asked questions about your robotic vacuum cleaner

We’ve collected the most frequently asked questions here for you for the Blaupunkt Bluebot C1 robot vacuum cleaner. Is your question not among them or you can’t figure it out? Then please contact us.

First check the wifi signal. Have you followed all the steps of the Bluebot app instruction and watched the video? You can find it on the support page. If it still doesn’t work, please contact our support department.

Please note that your C1 robot vacuum cleaner can only connect to a 2.4 Ghz network.

There may not be a hole in the tab of the cap, which is on top of the water reservoir. If there is no air in it, the tab will be vacuumed and the mopping function will not work. Furthermore, make sure that you only use water in the water tank, so do not add other liquids. These can cause clogging.

The robot is properly charged when both lights on top of the robot illuminate. The blue light also comes on briefly. If not? First check that the robot is fingertip away from the charging station. Do the charging plates on the bottom of the robot connect to the charging points of the charging station? If so, the robot is charging. The side brushes can sometimes get in the way. Is this the case? Then gently push them aside. Is the robot not charging? Let the robot move back and forth a bit. You’ll notice when it’s in the right place. Also, always check the battery level in the Bluebot app.

Did you follow all the steps as mentioned in the Bluebot app instructions? Have you already watched the video of the app installation? If it still doesn’t work, please contact our support department.

First fully charge the robot, this can take 3 to 4 hours depending on the type of robot. After this, you can turn on the robot for a first round of cleaning.

Try resetting your robot. You can also find the video instruction for this on your robot vacuum cleaner’s support page. If this does not work and your robot is within our warranty policy? Then you may send the robot for repair free of charge. For more information, please contact support@blaupunktrobotics.eu and enclose your purchase receipt.

You have a standard 2-year manufacturer’s warranty after purchase date.

You can reset the robot by pressing the ‘On’ & ‘Recharge’ button for 5 seconds at a time.

See the example in this video: https://youtu.be/DkJ8pg1j808 

© Blaupunkt Robotics
Open Chat
Need Support?
Can we help you?
We will reply within office hours (09:00-17:00 from Monday to Friday).
Please make sure to send us all information:
> Robot model (e.g. XBOOST)
> Robot S/N (e.g. VCBB1XS011811583)
> Purchase receipt in case of a defect
Rather e-mail? Please contact us via support@blaupunktrobotics.eu.
We will do our best to reply ASAP.